From first survey to final handover, we restore and protect stone for homes, shops, hotels, and offices across London. Our technicians clean, repair, polish, and seal marble, limestone, travertine, terrazzo, granite, and ceramic or porcelain surfaces. Typical work includes tile and grout cleaning, diamond grinding to correct lippage, crack and chip repair, countertop restoration, and neat silicone application. Every project ends with clear aftercare so results last and day to day upkeep stays simple.
Deep stone cleaning removes embedded soil, soap scum, and residues that mute the finish. We use pH-appropriate agents, oscillating pads, and wet extraction to lift dirt without harming the surface. Tile and grout cleaning targets dark joints, limescale, and mould. Where coatings are present, stripping, scrubbing and cleaning take off old sealants so the stone is ready for a new finish.
Full stone restoration corrects wear in traffic lanes and brings back clarity. We use staged diamond grinding to remove scratches or lippage, then hone and complete marble floor polishing to your chosen sheen from satin to high gloss. Limestone polishing and travertine cleaning follow the same controlled process, with care taken to keep edges flat and reflections even across the room.
Crack and chip repair uses colour-matched resins and fine abrasives to level and disguise damage. Filling holes in travertine tiles and grout cleaning and restoration stabilise open pores and voids so floors feel solid and clean. Grout replacing with new grout or epoxy resin improves hygiene and appearance, and can tighten joint lines on older installs. Tile repair addresses loose or hollow tiles with careful lift, reset, and alignment.
Quality stone sealing reduces water and oil ingress so spills wipe away more easily. We select impregnators by stone type and usage, then apply to measured coverage for even protection. In showers and kitchens, applying silicone achieves neat, watertight edges that resist mildew and stop moisture tracking under tiles.
Countertop restoration removes etches, rings, and knife marks, levels joins, and refines edges. Granite worktop care includes re-polishing drainer grooves, re-sealing, and tidying upstands so food prep areas look sharp and clean.
Jet washing safely renews patios, steps, and thresholds without streaking or blowing out joints. Where slips are a risk, we can adjust the hone to improve grip while keeping the surface easy to clean.
Our commercial stone maintenance programmes keep lobbies, lifts, and showrooms consistent through the year. Visits include inspection, targeted cleaning, light honing or spray burnishing, and top-up sealing where traffic is heaviest. This reduces the need for disruptive works and lowers lifetime cost.
We work on marble, limestone, travertine, terrazzo, slate, sandstone, granite, ceramic, and porcelain. View projects by material to see finishes before you book. Suggested internal links include project gallery, services, and contact.
Click on the material you would like to see images of our projects like: current floor maintenance, crack and chip repair, filling holes, marble cleaning and restoration, grout replacing, epoxy resin filling, stone maintenance, countertop restoration, applying silicone, scrubbing and cleaning to remove old sealants, diamond grinding to remove any lippage and jet wash
